ASHLAND CHEMICAL INC -- DREWGARD 315 CORROSION INHIBITOR -- 6850-00N072811 
=====================  Product Identification  =====================

Product ID:DREWGARD 315 CORROSION INHIBITOR
MSDS Date:08/17/1994
FSC:6850
NIIN:00N072811
=== Responsible Party ===
Company Name:ASHLAND CHEMICAL INC
Address:ONE DREW PLAZA
City:BOONTON
State:NJ
ZIP:07005
Country:US
Info Phone Num:606-263-7600
Emergency Phone Num:606-324-1133;800-274-5263
CAGE:DO048
=== Contractor Identification ===
Company Name:ASHLAND CHEMICAL CO., ASHLAND OIL DIV.
Address:P.O. BOX 2219
Box:2219
City:COLUMBUS
State:OH
ZIP:43216
Phone:606-324-1133
CAGE:DO048
Company Name:DREW CHEMICAL CORP,DIV OF ASHLAND CHEMICAL CO
Address:ONE DREW CHEMICAL PLAZA
Box:City:BOONTON
State:NJ
ZIP:07005
Country:US
Phone:606-324-1133
CAGE:52454

=============  Composition/Information on Ingredients  =============

Ingred Name:MOLYBDIC ACID, SODIUM SALT; (SODIUM MOLYBDATE)
CAS:7631-95-0
RTECS #:QA5075000
Fraction by Wt: 10-25%
OSHA PEL:5 MG MO/M3
ACGIH TLV:5 MG MO/M3

Ingred Name:SODIUM HYDROXIDE (CERCLA)
CAS:1310-73-2
RTECS #:WB4900000
Fraction by Wt: 1-10%
OSHA PEL:2 MG/M3
ACGIH TLV:C 2 MG/M3
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:1,H-BENZOTRIAZOLE (4 OR 5)-METHYL SODIUM SALT; (SODIUM
    TOLYLTRIAZOLE)
CAS:64665-57-2
Fraction by Wt: 1-10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SUPDAT:THAT A SPILL HAS OCCURRED.
RTECS #:9999999ZZ

Ingred Name:RESP PROT:SPECIFIED CNDTNS (SEE YOUR INDUST HYGIENIST).
    ENGINEERING/ADMINISTRATIVE CONTROLS SHOULD BE (ING 6)
RTECS #:9999999ZZ

Ingred Name:ING 5:IMPLEMENTED TO REDUCE EXPOSURE.
RTECS #:9999999ZZ

Ingred Name:PROT GLOVES:NITRILE RUBBER.
RTECS #:9999999ZZ

Ingred Name:EYE PROT:& FULL LENGTH FACESHIELD .
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:EXPOSURE CAUSES
    IRREVERSIBLE EYE DAMAGE. SYMPTOMS MAY INCLUDE STINGING, TEARING,
    REDNESS, SWELLING, CORNEAL DAMAGE & BLINDNESS. INHALATION:MIST CAN
    CAUSE DAMAGE TO NASAL & RESPIRATORY PASSA GES. INGESTION:RESULTS IN
    SEVERE DAMAGETO MUCOUS MEMBRANES & DEEP TISSUES. SKIN:EXPOSURE
    CAUSES (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:IRREVERSIBLE SKIN DAMAGE. SYMPTOMS MAY
    INCLUDE REDNESS, SWELLING, BURNS, AND SEVERE SKIN DAMAGE.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN DISORDERS MAY BE
    AGGRAVATED BY EXPOSURE TO THIS MATERIAL.

=======================  First Aid Measures  =======================

First Aid:SKIN:IMMED FLUSH EXPOSED AREA W/WATER FOR @ LEAST 15 MINS,
    GET MED ATTN. REMOVE CONTAMD CLTHG. LAUNDER CONTAMD CLTHG BEFORE
    RE-USE. REMOVE CONTAMD SHOES PROMPTLY. DISCARD SHOES SATURATED
    W/THIS PROD.  EYES:IMMED FLUSH W/LG AMTS OF WATER FOR@ LEAST 15
    MINS, LIFTING UPPER & LOWER LIDS OCCASNLY. GET IMMED MED ATTN. IF
    PHYS IS NOT IMMED AVAIL, CONTINUE FLUSHING W/WATER. DO NOT USE
    CHEMICAL (SUPDAT)

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER FOG.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . WATER MAY BE USED TO KEEP FIRE-EXPOSED CONTAINERS COOL
    UNTIL FIRE IS OUT.
Unusual Fire/Explosion Hazard:CAN REACT W/CHEMICALLY REACTIVE METALS
    SUCH AS ALUMINUM, ZINC, MAGNESIUM, COPPER ETC TO RELEASE HYDROGEN
    GAS WHICH CAN FORM EXPLOSIVE MIXTURES WITH AIR.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SM SPILL:NEUT & MOP UP SOLN. LG SPILL:PERSONS
    NOT WEARING PROT EQUIP SHOULD BE EXCLUDED FROM AREA OF SPILL UNTIL
    CLEAN-UP IS COMPLETED. STOP SPILL @ SOURCE. DIKE TO PVNT SPREADING.
    PUMP TO SALVAGE TAN K. PVNT RUN-OFF TO SEWERS, STREAMS/OTHER
    (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP FROM FREEZING. CONTAINERS OF THIS
    MATERIAL MAY BE HAZARDOUS WHEN EMPTIED.
Other Precautions:SINCE EMPTIED CONTAINERS RETAIN PRODUCT RESIDUES
    (VAPOR, LIQUID, AND/OR SOLID), ALL HAZARD PRECAUTIONS GIVEN IN THIS
    DATA SHEET MUST BE OBSERVED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF WORKPLACE EXPOS LIMS(S) OF PROD/ANY COMPONENT
    IS EXCEEDED (SEE SECTION II), NIOSH APPRVD AIR SUPPLIED RESP IS
    ADVISED IN ABSENCE OF PROPER ENVIR CONTROL. OSHA REGS ALSO PERMIT
    OTHER NIOSH APPRVD RE SP (NEG PRESS TYPE) UNDER (ING 5)
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL AND/OR LOC EXHAUST)
    VENT TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:RESIST GLOVES SUCH AS:NEOPRENE, (ING 7)
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (ING 8)
Other Protective Equipment:WEAR IMPERVIOUS CLOTHING & BOOTS. ANSI
    APPRVD EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH:12.5-13.8. FIRST AID PROC:ANTIDOTE. INGEST:DO NOT INDUCE VOMIT.
    VOMIT WILL CAUSE FURTHER DMG TO THROAT. DILUTE BY GIVING WATER.
    GIVE MILK OF MAGNESIA. KEEP WARM, QUIET. GET MED ATTN IMMED.
    INHAL:RE MOVE INDIVIDUAL TO FRESH AIR. SPILL RELEASE PROC:BODIES OF
    WATER. IF RUN-OFF OCCURS, NOTIFY PROPER AUTH AS REQD, (ING 4)

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:17.50 @20C
Vapor Density:HVR/AIR
Spec Gravity:1.195 @ 25C
pH:SUPDAT
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT KNOWN
Appearance and Odor:CLEAR TO SLIGHTLY HAZY YELLOW LIQUID.
Percent Volatiles by Volume:70-85

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG MINERAL ACIDS. REACTIVE METALS SUCH AS ALUMINUM & MAGNESIUM,
    STRONG ORGANIC ACIDS, COPPER, ORGANIC MATRIALS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION OR COMBUSTION
    MAY PRODUCE SODIUM HYDROXIDE, ETC.

====================  Disposal Considerations  ====================

Waste Disposal Methods:SM SPILL:DISPOSE OF I/A/W ALL LOCAL, STATE &
    FEDERAL REGS. LG SPILL:POUR INTO LG TANK OF WATER & NEUT. FLUSH TO
    DRAIN W/LG EXCESS OF WATER I/A/W APPLIC FEDERAL, STATE & LOCAL
    LAWS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.